An opening.
Entirely yours.
Start with a design you love. Shape every part, choose the hardware, and see your custom steel door come to life.
Every detail is yours.
View tools
Your photo stays on this device and is not sent with the quote.
Tap a part to refine it. Drag to turn. Pinch or scroll to get closer.
Your design, made to measure. We carry these selections into your quote and refine the final construction with you.
The doors.
Refine the proportions and glass divisions. A double door keeps both leaves beautifully consistent.
True divided glass uses D’Hierro’s 1½″ T-bar. Choose applied bars below for slimmer divisions.
Divider constructionApplied bars or individual glass panes+
A picture window above the doors. One uninterrupted view, with the shape and height you choose.
Fine-tune the patternNumber of panes & individual bar positions+
Move each bar within the glazed area. Horizontal positions are measured up from the bottom; vertical positions from the left.
Add this part above to refine its shape and proportions.
More design optionsHow it opens, arches, and steel profile+
Set how it works.
Choose your hardware style and the active side. The controls below the model let you try the opening at any time.
Hardware detailsHandle height & mounting+
Entry hardware mounts on a 4″ solid steel plate beside the glass. The 3½″ steel profile can hold the mortise set without that plate. Our signature set is the Emtek Brisbane UL3313 mortise. Other hardware can be discussed with your quote.
Hardware is shown in Flat Black, with hinges matching the black door. Choose your final hardware finish with us.
The finishing details.
Your design is shown in black with clear glass. Explore other material options below for your quote.
The preview shows a black door with black hardware. Choose your final finish with us.
Our standard Cardinal LoĒ³-366 insulated tempered glass is shown throughout the preview.
Ready for a real quote.
Your dimensions, hardware style, and saved design travel with your request. We confirm your final door and hardware finishes with you.
- Configuration
- Location
- Door size
- Overall opening
- Additions
- Lite pattern
- Construction
- Preview finish
- Glass
- Hardware
- Swing
- Jamb
- Transom detail
- Left sidelight
- Right sidelight
Start the real conversation.
Send the configuration with your project details. We review requests within one business day, then confirm constructability, measurements, glass, hardware, finish, installation scope, and project-specific pricing.
- Typical fabrication: 8–12 weeks after final approvals
- Most local installations: one day
- Smaller projects may move faster; major complex packages receive a project-specific schedule
After final design approval and confirmation of scope. Smaller projects may move faster; unusually large or complex work may take longer.
Larger opening packages can take a few days. The project schedule is confirmed before fabrication begins.
We review the build, opening, plans, and project details before preparing project-specific pricing.
From a rough opening to a useful design brief.
The visual model responds to the product rules and dimensions you choose. It gives your architect, builder, and D’Hierro the same clear starting point before field verification and shop drawings.
- 01
Set the layout
Choose how your doors open, set the dimensions, and add sidelights or a transom. Refine the glass pattern and steel profile whenever you are ready.
- 02
Test the experience
Orbit the 3D model, open or slide the door, inspect dimensions, upload a private local photo, or open the build at true scale in AR.
- 03
Save or request
Copy the persistent build link without signing in, print the specification, download a snapshot, or send your design with your project details for review.
Plan the opening with fewer unknowns.
What dimensions can I change in the custom steel door builder?
You can set door or opening width and height, individual sidelight widths, transom height, arch rise, steel profile, and divider thickness. Available ranges adjust to the selected hinged, pivot, sliding, or partition layout.
Which steel door layouts can I design?
Exterior entries support single and double hinged or pivot doors. Hinged entries can carry sidelights and rectangular or arched transoms; pivot entries stay straight-headed with no transom in the current builder rules. Interior openings add track, barn and pocket doors and one- to four-panel partitions; track can use sidelights, while barn, pocket, and partition systems stay straight-headed. Soft or full arches apply to hinged layouts, and on a plain single door the arch is part of the swinging leaf.
Can I save or share my configured door?
Yes. Save / share copies a configuration-specific link. The link restores the door layout, dimensions, divisions, hardware style, and opening position so another person can review or continue the same build.
Why does the door builder not show a final price?
Custom steel-door pricing depends on verified field conditions, engineering, glass specifications, hardware, finish, delivery, and installation scope. The builder creates a precise design brief; D’Hierro reviews it before issuing project-specific pricing.
How long does a custom steel door project take?
Most custom projects have an 8–12-week fabrication lead time after final design approval and confirmation of scope. Smaller projects may move faster, while unusually large or complex projects may require additional time. Most local installations are completed in one day; larger packages can take a few days. D’Hierro confirms the project schedule before fabrication begins.
Plans and photos can be attached directly to the request above. For larger files, email info@dhierro.com. Prefer to talk it through? Call (972) 943-9924.