Custom Iron  /  Entry & Pivot Doors  /  Door Builder
Interactive Entry & Pivot Door Studio

Design your custom steel door.

Configure the opening in 3D—dimensions, sidelights, transom, arch, glass, finish, and hardware. No email is required to start; save or share when you are ready.

No email to beginTrue dimensional 3DAR + shareable build
D’Hierro Door Builder Single hinged door
Interactive 3D 36″ W × 96″ H overall
Overall opening36″ W × 96″ H overall
Door leaf36″ W × 96″ H
LayoutStraight door only
ReferenceDH-DOOR

Every member is modeled at the dimensions selected. This remains a design concept—not a shop drawing. D’Hierro verifies the opening, engineering, glass, hardware, and installation conditions before fabrication.

Layout

Build the architecture.

Start with one straight steel door, then change the operation, surround, dimensions, glass divisions, and profile.

Exterior or interior

Exterior entries are insulated hinge or pivot doors. Interior openings add sliding, pocket, and partition options.

Door functionality
Opening type

Standard hinge — welded barrel hinges, the classic steel-door swing. Pivot — the door rotates on offset floor and head pivots instead of edge hinges (straight heads only).

Number of doors
Transom
Combination
Top shape D’Hierro addition

The arch is built into the door leaf and swings with it, measured to the crown — the overall opening does not change, and sidelights sit beside it with straight tops. Want the curve above the door instead? Choose an arched transom. Pivot and sliding doors take straight heads only.

Exact dimensions

Enter inches. Door width is per leaf; the calculated overall opening updates automatically.

Door widthper leaf in
Door heightto top of leaf in
Handle heightto handle center in
Calculated overall opening36″ W × 96″ H overall
Lite options
Division
Divider thickness
Frame profile
Your build is attached

Start the real conversation.

Send the configuration with your project details. We review requests within one business day, then confirm constructability, measurements, glass, hardware, finish, installation scope, and project-specific pricing.

Build referenceDH-DOOR
  • Typical fabrication: 8–12 weeks after final approvals
  • Most local installations: one day
  • Smaller projects may move faster; major complex packages receive a project-specific schedule
Attached buildSingle hinged door
Opening photos, plans, or inspiration Optional

Attach up to five PDFs or photos, 4 MB each. Files are stored privately with your request. Larger files can still be emailed.

True-scale preview

Open this build on your phone.

Scan the code with your phone, open the saved build, then tap View in your room. The model keeps the dimensions selected here.

Your device will choose WebXR, Android Scene Viewer, or iPhone Quick Look when supported.
Build freely. Contact us when you are ready. No contact details are required to design, preview, save, or share. Pricing remains project-specific because the verified opening, configuration, glass, hardware, finish, project location, and installation scope all change the work.
Typical fabrication8–12 weeks

After final design approval and confirmation of scope. Smaller projects may move faster; unusually large or complex work may take longer.

Local installationUsually one day

Larger opening packages can take a few days. The project schedule is confirmed before fabrication begins.

Request reviewWithin one business day

We review the build, opening, plans, and project details before preparing project-specific pricing.

How it works

From a rough opening to a useful design brief.

The visual model responds to the product rules and dimensions you choose. It gives your architect, builder, and D’Hierro the same clear starting point before field verification and shop drawings.

  1. 01

    Set the layout

    Choose the operating family, door count or partition panels, sidelights, transom, arch, exact opening dimensions, lite grid, dividers, and steel profile.

  2. 02

    Test the experience

    Orbit the 3D model, open or slide the door, inspect dimensions, compare finishes and glass, upload a private local photo, or open the build at true scale in AR.

  3. 03

    Save or request

    Copy the persistent build link without signing in, print the specification, download a snapshot, or send the complete normalized configuration with your project details for review.

Door builder FAQ

Plan the opening with fewer unknowns.

What dimensions can I change in the custom steel door builder?

You can set door or opening width and height, individual sidelight widths, transom height, arch rise, steel profile, and divider thickness. Available ranges adjust to the selected hinged, pivot, sliding, or partition layout.

Which steel door layouts can I design?

Exterior entries support single and double hinged or pivot doors. Hinged entries can carry sidelights and rectangular or arched transoms; pivot entries stay straight-headed with no transom in the current builder rules. Interior openings add track, barn and pocket doors and one- to four-panel partitions; track can use sidelights, while barn, pocket, and partition systems stay straight-headed. Soft or full arches apply to hinged layouts, and on a plain single door the arch is part of the swinging leaf.

Can I save or share my configured door?

Yes. Save / share copies a configuration-specific link. The link restores every product option, dimension, finish, glass choice, accessory, and swing position so another person can review or continue the same build.

Why does the door builder not show a final price?

Custom steel-door pricing depends on verified field conditions, engineering, glass specifications, hardware, finish, delivery, and installation scope. The builder creates a precise design brief; D’Hierro reviews it before issuing project-specific pricing.

How long does a custom steel door project take?

Most custom projects have an 8–12-week fabrication lead time after final design approval and confirmation of scope. Smaller projects may move faster, while unusually large or complex projects may require additional time. Most local installations are completed in one day; larger packages can take a few days. D’Hierro confirms the project schedule before fabrication begins.

Explore entry & pivot doors → Review materials & finishes → See how a commission moves through the studio →

Plans and photos can be attached directly to the request above. For larger files, email info@dhierro.com. Prefer to talk it through? Call (972) 645-2144.